Seal 44/62 User Manual download pdf (Page 21)

Application Processes 19

English

6.2 Webbing the films

After the laminator has heated up;

• Remove the infeed table. If applicable, the infeed table can be stored temporarily on

the stand.

• Unroll the film on the top supply shaft, so that an adequate length is hanging over the

top roller (see figures 13 & 14). If necessary, release the supply shaft brake.

• If using a film with release liner, peel back liner and attach it to the wind-up tube.

Figure 13 Figure 14

No release liner With release liner

• When using a laminate on the bottom, repeat the above procedure for the bottom

supply-shaft.

• Stick the lower web on the upper web (figure 15, 16 or 17)

Figure 15 Figure 16

No release liner With release liner

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 34 35

No comments

Seal 44/62 User Manual Page 21