SEAL Image 410 Troubleshooting Guide download pdf (Page 26)

PROCESS CONTROL SHEET

Process: _________________________________

Application Use: ___________________________

Top Unwind Shaft:__________________________

Bottom Unwind Shaft: _______________________

CONTROL PANEL SETTINGS

Top Roller Temp: __________________________

Bottom Roller Temp: ________________________

Motor Speed Setting: ________________________

Program Preset ____________________________

WEBBING SETTINGS

Web Tension Top Unwind Shaft:

Light ________/ Med. _________/ Heavy _________

Web Tension Bottom Unwind Shaft:

Light ________/ Med. _________/ Heavy _________

Nip Setting: _______________________________

Images: Sheet Fed ___________/ Roll Easel _______

NOTE: We recommend that you make a

photocopy of this page. With each successfully run

application, record the process and settings and a

diagram of the webbing procedure. Keep the record

so the application can be repeated at a later date.

HINT: If a standard image is made available for

each new process then sales materials and samples

can be developed for reference.

Figure 19. Blank Webbing Diagram

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

No comments

SEAL Image 410 Troubleshooting Guide Page 26